Fume incinerator is a process for catalytically purifying exhaust gas. The exhaust gas is sent to the heat exchanger through a pipe and heated to the initial temperature required for catalytic combustion. The preheated exhaust gas is burned through the catalyst layer.
Process principle and process
With the help of catalyst, the organic waste gas can be burned without flame under the condition of lower ignition temperature, decomposed into CO2 and H2O by oxidation, and release a lot of heat energy at the same time, so as to achieve the method of removing harmful substances in the waste gas.
The reaction process is as follows:
1. It can be used for the purification treatment of organic solvents (mixed organic waste gas such as benzene, alcohol, ketone, aldehyde, ester, phenol, ether, alkane, etc.);
2. It is suitable for wire, cable, enameled wire, machinery, electrical, chemical, instrumentation, automotive, bicycle, motorcycle, engine, tape, plastic, household appliances and other industries of organic waste gas purification;
3. It can be used in a variety of drying tunnels, printing iron cans, surface spraying. Printing ink, electromechanical insulation treatment, leather shoes and other drying lines to purify the organic waste gas generated in each process.
Selection and precautions
1. The waste gas components do not contain the following substances:
A. no esters with high viscosity
B, phosphorus, arsenic, antimony, mercury, lead, zinc, tin
C. high concentration of dust
2. Please indicate the composition, concentration and outlet temperature of the exhaust gas when selecting the equipment type;
3. There is no corrosive gas in the equipment installation place, and there are good rainproof measures;
4. Power supply required by the equipment: three-phase ac 380V, frequency 50HZ;
5. Please specify when you have special requirements.
Hot Tags: 烟气焚化炉，中国，制造商，供应商，工厂，价格，出售